ACCESSORIES · SPEAKERS & EXCHANGEORS
Storage &
Inverter accessories.
Ask for connections and mounting accessories to match your devices.
For addition, modification or replacement in the PV storage system. Send TP ENERGY the exact device design and your needs – we will clarify the assignment with you.
The appropriate accessories start with the device.
Select the required articles Clicking on the icon image will open the properties. About "Enquire offer" You tell us your needs – from the power connection to the device reception.
Match performance and communication.
Power cables and data lines have different tasks in the PV storage system. Connection form, device generation and shared combination are tested together.
Battery power cables and connection sets
For the intended power connection in the storage system. Name both devices, existing connectors and the required length.
Request a quote: Battery power cables and connection sets
Characteristics and use: Battery power cables and connection sets
Operation
Battery power cables transmit direct current between the intended storage and inverter connections or between released system components. There are individual lines and assembled sets. A set can also contain communication or protective conductor connections; the exact scope of delivery counts.
Selection features
Voltage range, permissible current, conductor cross-section, length and line path must fit the system. Also contacting, polarity and contact protection belong to the selection. A solar cable or a similar-looking plug is not yet a suitable battery connection.
Approvals and request
For replacement and extension, both remote sites are to be named precisely. Predetermined line lengths and approved connector sets are taken from the device documents. An independent extension or mixture of plug-in systems shall not be required as an equivalent replacement.
Device-specific communication and control lines
For supported data and control connections between your devices. Ask with accurate device generation and connection task.
Request a quote: Device-specific communication and control lines
Characteristics and use: Device-specific communication and control lines
Operation
These cables transmit, for example, battery status, permissible charging and discharge currents or control signals. Depending on the device, CAN, RS485 or own connection systems are used. They don't take over battery power transmission.
Interfaces and occupancy
An RJ45 connector does not automatically mean Ethernet. The same plug housing can be used differently and lead other signals. Line structure, shielding, pin assignment, length and, if necessary, bus termination are based on the devices involved.
Device sharing and request
Even with suitable wire, device generation, software level and supported communication profile must fit together. Therefore, call both devices and the task of the connection. An ordinary network cable is not generally suitable as a replacement for any system line.
Carry and set up equipment suitable.
Mechanical accessories are selected for device, total weight and mounting location. A similar housing size does not yet confirm a suitable mounting or permissible mounting.
Wall supports and mounting plates
For the appropriate wall mount of your device. Send the device name as well as information about the surface and existing holder.
Request a quote: Wall brackets and mounting plates
Characteristics and use: Wall brackets and mounting plates
Operation
Device-specific brackets carry an inverter or a storage device at its mounting points. Mounting plates can be part of a coordinated recording. Hole pattern, mounting and securing against accidental release must fit the device.
Selection features
Load capacity of wall and fastening, device weight and prescribed alignment are considered together. Necessary free spaces for cooling, operation and maintenance remain. Any plate does not replace a shared holder.
For your request
For spare parts, the exact device design and photos of the existing recording help. Installation site, underground and environmental conditions are included in the request. The mounting is chosen professionally for this structure.
Storage feet and pedestal
For a planned floor setting of the storage. Name storage system, expansion stage and location.
Request a quote: Storage feet and base
Characteristics and use: Storage feet and base
Operation
A suitable base carries a designated storage unit on the ground and forms the holder for the permissible structure. There are device-specific bases and stand solutions; they are not any replaceable furniture platforms.
Selection features
Total weight, number and arrangement of the memory modules as well as the sustainable substrate determine the selection. Additional wall fixtures or fuses may also be required in the case of floor mounting. A socket alone therefore does not confirm free-standing or expandable assembly.
Establishment and request
Please note space requirements, accessibility and the documented installation conditions of the entire unit. An elevated base does not automatically make an unsuitable location suitable. Tell us the storage system and the planned expansion stage.
Important terms simply explained.
Made-up connection kit
A set prepared for a specific connection with fixed lines, connections and lengths. Whether communication line, safety ladder or other accessories are included, results from the concrete delivery.
Device generation and release
Series, version and revision can change connections or mounting points. A release shall apply to the designated combination and, where appropriate, to certain software levels. A similar device name is not sufficient for assignment.
Power cable and signal line
Power cables transmit the charging and discharging energy. Signal and control lines transmit information or commands. Both tasks require appropriate lines and connections; a data connection does not replace a power connection.
BMS and battery communication
The battery management system monitors and controls the battery. It can communicate operating conditions and limits to the inverter via a supported connection. The exact communication is part of the shared device combination.
RJ45, CAN and RS485
RJ45 describes a connector design. CAN and RS485 describe different technical basics of data transmission. Neither the signal nor the appropriate pin assignment or device compatibility can be derived from the shape of a socket.
Load capacity and installation clearance
Load capacity concerns the complete structure including attachment and surface. Assembly spaces ensure the required ventilation, accessibility and maintenance. External dimensions alone do not reflect these requirements.
What does the selection matter?
The starting point is the exact device designations of both sides or the device to be installed. Check existing scope of delivery and shared accessories. Electrical data, length, connection system and communication task count for cables; for mountings and sockets total load, recording, surface and prescribed clearance. Connection and assembly are planned according to the current equipment documents.
This information will help us with your offer.
A readable type plate and existing documents facilitate the assignment. Describe what should be added or replaced.
- Desired accessory type as well as replacement, conversion or extension
- Accurate name and generation of memory, inverter and, where applicable, other remote site; known software levels
- Available documents, part numbers and photos of type plate, accessible connections or mounting
- Required length or number; for assembly total structure, surface and location
Photos and existing documents can be added directly to the contact form.
Frequently asked questions.
Does a cable with the same plug fit automatically?
No, no, no. Pin assignment, signal, electrical design and device release may vary. This also applies to RJ45 connections. Send us both device names and the intended task of the line.
Can a memory with a base always stand without wall mounting?
That depends on the unlocked structure. Also a floor installation can require additional fastenings. The main requirements are storage design, expansion stage, surface and assembly specifications. Name this information when you request.
Technical basis.
View Sources
The basics treat stationary storage systems as a coordinated unit. In addition, the current documents and approvals of both devices are decisive for a specific connection or assembly. Public short presentations do not replace the full text of the standard or the technical interpretation.
DKE: Stationary energy storage systems – planning and installation (VDE-AR-E 2510-2:2021-02)
DKE: Lithium-ion batteries – basics, compendium and risk assessment
Accessories for memory and inverter request.
Tell us your devices and the planned change. We will agree the required scope with you and prepare your offer.