ELYSATOR.
Heating water
Prepare.

• ELYSATOR trio 10.1
  System water content below 500 l · Flow below 3 m³/h
  Max. 6 bar · max. 90 °C
  Details →Enquire
• ELYSATOR trio 15.1
  System water content below 1.500 l · Flow below 5 m³/h
  Max. 6 bar · max. 90 °C
  Details →Enquire
• ELYSATOR trio 25.1
  System water content below 5.000 l · Flow below 7 m³/h
  Max. 6 bar · max. 90 °C
  Details →Enquire

Filtration, micro bubble deposition, anode protection and magnetic flow filter. Select device size by system water content and flow rate; filters and anodes are execution specific.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• SorbOx LI
  With demineralization; according to the prospectus up to 800 l circulation waterDimensions: Height 470 mm · Installation length 195 mm · Ø 205 mmCheck design and water quality.
  1 inch AG · max. 6 bar · max. 90 °C
  Details →Enquire
• SorbOx SI
  Without demineralization; interpretation limit due to source deviation on requestDimensions: Height 310 mm · Installation length 195 mm · Ø 205 mmObserve deviation between manufacturer's web table and prospectus.
  1 inch AG · max. 6 bar · max. 90 °C
  Details →Enquire

LI additionally contains a demineralization unit, SI does not. For demineralization, the prospectus shall not exceed 60 °C; 90 °C shall not be released for this operation step. The manufacturer mentions contradictory plant volumes for SI: brochure and description 300 l, web table 400 l. Clear the interpretation before ordering; do not adopt a uniform limit value.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP 500 highpower
  Capacity 4.500 l at 1 °dH · about 10 l/minDimensions: Length 445 mm · Ø 110 mm
  3/4 inch AG · max. 4 bar · max. 60 °C
  Details →Enquire
• PUROTAP 1000 highpower
  Capacity 8.500 l at 1 °dH · approx.10 l/minDimensions: Length 755 mm · Ø 110 mm
  3/4 inch AG · max. 4 bar · max. 60 °C
  Details →Enquire
• PUROTAP 750 nexion
  Capacity 7.000 l at 1 °dH according to original brochureDimensions: Length 755 mm · Ø 110 mmpH-regulating mixed bed resin.
  3/4 inch AG · max. 4 bar · max. 60 °C
  Details →Enquire

Capacities apply at 1 °dH raw water and decrease at higher hardness. For nexion, the original brochure mentions 7 m³ at 1 °dH; the obviously different number 755.000 l on the product website is not taken over. Pressure approvals are only valid for the described structure.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP micro spare cartridge
  Coloured envelope resin · approximately 4–5 l/minDimensions: Length 450 mm · Ø 80 mm
  3/4 inch AG · max. 4 bar · max. 60 °C
  Details →Enquire
• PUROTAP micro with wall mount DS
  Wall station with cartridge; horizontal or vertical mountingMax. 6 bar only with holder DS and adapters.
  Adapter 3/4 inch IG × 3/4 inch AG
  Details →Enquire

The replacement cartridge alone is described up to 4 bar. Up to 6 bar apply only with wall mount DS and matching adapters. Exhaustion of the colour envelope resin can be seen by changing the colour.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP micro Multiflex
  Capacity 3.000 l at 1 °dH · approx. 4–5 l/minWith system separator BA and colour jacket cartridge.
  3/4 inch AG · max. 6 bar · max. 60 °C
  Details →Enquire
• PUROTAP 500 Multiflex
  Capacity 4.500 l at 1 °dH · about 10 l/minWith system separator BA and LFM meter.
  3/4 inch AG · max. 6 bar · max. 60 °C
  Details →Enquire

For supplementary water in heating systems. The micro version shows the resin consumption by color change; 500 Multiflex additionally has an LFM meter. Check connection, drinking water protection and concrete assembly.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP Zero blue
  20 l reusable containers for fresh water filling and refillingRegenerative resin; circulation desalination according to website only in new plants immediately after filling.
  Article 214 988
  Details →Enquire
• PUROTAP Zero red
  20 l reusable containers for desalination in circulationNon-regenerative disposable resin in the reusable container.
  Article 214 960
  Details →Enquire
• PUROTAP Zero M Connection
  For mobile useArticle number due to different manufacturer stands on request.
  Quick closure · Measuring counter · Connection hoses
  Details →Enquire
• PUROTAP Zero S Connection
  For stationary useArticle number due to different manufacturer stands on request.
  Quick release · Measuring meter with GLT connection after construction
  Details →Enquire

A complete unit requires reusable containers and suitable connection. blue is intended for fresh water, red for circulation desalination. The article numbers of the connection sets differ between website and brochure; therefore, model and concrete compilation personally confirm.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP ProFill 25 hybrid
  Filtration and demineralization in a mobile unitStandard wheelset or stair climbing wheelset according to the brochure; specify the desired scope of delivery.
  3/4 inch GNP · water flow 20 l/min
  Details →Enquire

Modular device with filter bag, magnet, ion exchange resin and removable pump. The prospectus specifies PN 10 and max. 80 °C for the described components; check the permissible operating values of the complete combination including resin and pump before selection.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP leader
  Device with integrated measurement and interchangeable cartridge systemDimensions: Height 720 mm · Ø 300 mm
  3/4 inch AG · max. 4 bar · max. 60 °C
  Details →Enquire
• PUROTAP L60 highpower
  Replacement cartridge; capacity 34.000 l at 1 °dHpH neutral mixed bed resin.
  For PUROTAP leader
  Details →Enquire
• PUROTAP L50 nexion
  Interchangeable cartridge; capacity 30.000 l at 1 °dHpH-regulating mixed bed resin.
  For PUROTAP leader
  Details →Enquire

Select the device and matching L60-highpower or L50-nexion cartridge. Integrated measurement and radio transmitter; the appropriate optional radio receiver is required for switching external devices. Do not order cartridges as complete devices.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP expert
  Desalination power according to manufacturer: without pump 10, with pump 20 l/minDimensions: H × B × T: 133 × 64 × 60 cmFilter membrane and accessories after concrete design.
  230 V / 16 A · required inlet at least 30 l/min
  Details →Enquire

For filling larger plants. The manufacturer's site indicates at least 30 l/min inlet and up to 20 l/min desalination performance with pump; inlet, operating and pump pressure are different values. Check water quality, temperature and connection conditions before design.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP highpower mixing bed resin
  pH neutral mixing bed resin for demineralizationCheck equipment release and raw water quality.
  Container and filling quantity on request
  Details →Enquire
• PUROTAP nexion mixed bed resin
  pH-regulating mixed bed resin with increased anionic resin contentSelect suitable for the specific installation.
  Container and filling quantity on request
  Details →Enquire

The appropriate resin quality depends on the type of plant, water quality and device. Specify the containers and quantities available on request. Original brochure describes the two resin qualities; safety data sheet is linked in the manufacturer download area.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP LFM
  Meter for flow, total, conductivity and TDSCounter with case and adapters according to the manufacturer.
  Mobile use · Warning function
  Details →Enquire
• PUROTAP LFM GLT
  Art.-Nr. 214 984 · Measuring counter with potential-free outputDimensions: Installation length 135 mmFor fixed installation up to 6 bar; no battery operation.
  Power supply 4,5 V / 1 A · 1 inch AG flat sealing
  Details →Enquire

Measuring device, no heat generator. LFM-GLT has a potential-free output and power supply; the GLT version is not battery-powered. Check permitted pressure and installation situation for concrete execution.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP AK 2035
  Analysis case with EC-pH 2035 and accessoriesDimensions: Case L × H × B: 390 × 300 × 100 mmCheck delivery and calibration.
  Bluetooth / Smart app for measurement data
  Details →Enquire

Suitcase with combi meter, hardness measuring cutlery, calibration and storage fluids according to manufacturer's scope of delivery. The information about battery type and suitcase weight differs between product pages; therefore confirm before re-ordering or planning.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• PUROTAP EC-pH 2035
  pH 0–14 · Conductivity 0–9.990 μS/cmDimensions: Height 185 mm · Ø 40 mmInterchangeable probe.
  Bluetooth / Smart app · Battery operation
  Details →Enquire

Measures pH, conductivity, TDS and temperature. Temperature compensation and protection rating IP67 according to the manufacturer's website. Check sensor care, calibration and appropriate battery type using the device instructions.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• Sanol H-15 green
  Alkaline cleaning agent for heating and cooling systemsClear the application, exposure time and dosage before use.
  Containers and suitable quantity on request
  Details →Enquire

For the removal of loose and easily adherent deposits, such as magnetite and rust sludge. Determine the quantity, exposure time, material compatibility and subsequent flushing according to manufacturer specifications. The assigned original document is the product portfolio; no separate product instructions are linked on the German product page.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.

• Sanomat Berger Alternator
  Alternating flushing with pulsating compressed air/water mixtureCheck required external supply and connection hoses according to original prospectus.
  Freshwater connection · Compressed air connection
  Details →Enquire

For the professional cleaning of muddy heating and cooling circuits. Pre-clear compressed air supply, connection accessories, system pressure and desired combination with cleaning agents.

Availability on request. Check water quality, system volume, operating pressure, temperature and scope of delivery for the specific plant.